Key Features

• Four-station rotary design can reduce operation waiting time and improve production capacity;
• With fast positioning function, the machine can quickly rotate to the specified position. ;
• Ten groups of memory function, convenient for the operator to set a variety of large and small shoes after opening archives;
• Computerized PLC controller with man-machine interface screen, using both hands to start, more safe and fast;
• Intuitive man-machine interface design, so that the operator can easily grasp the machine status and setting;
• The man-machine interface screen automatically displays the number of molding times to effectively master the output of shoemaking;
• With fault alarm function, the operator can immediately find the problem and quickly eliminate the problem;
• The pre-charging valve is used to replenish the oil volume of the rising hydraulic cylinder, which can accelerate the operation and save the operation time;
• When the front and back tightening mechanism backs up, the backward distance can be controlled, and the size of the shoes can be replaced easily; 10. Two pressure rods can be deflected to facilitate the taking and placing of shoe last; Eliminate the problem of old fixed pressure rod, inconvenient operation;
• There are 8-22 rubber foam press blocks on each side. Each press block is driven by an independent hydraulic cylinder. It can be pressed on the tight wall with different shoe types of different sizes.
• Each side press block is equipped with a baffle pin for choice of use and use, so that the adhesion of the shoe side to achieve the best effect;
• There are many types of shoe head binding pressing block for selection, which can achieve good pressing effect for various shoe types and sizes;
• Suitable shoe size (including pressure bottom die): length 130-400mm/width below 150mm/height below 200mm/side height 65-80mm;
• Full hydraulic system design, suitable for the bottom of the dragon boat, wall type bag bottom sports shoes and casual shoes outsole pressure;
• Pressing bottom, pressing edge and pressing before and after can be completed at one time or individually;
• The adjustment of the two pressure rods adopts the hydraulic automatic balance structure, for the change of the height of the shoe last, the long or half long shoes are free from adjustment, and ensure the average pressure of the two pressure rods, so that the pressure force of the sole is more uniform;